Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding 2nd floor drain to existing vent pipe
[ 11 Answers ]
this question has been addressed before. But I would like to have more input on the subject for my own project. I am finishing my 2nd floor cape into a master suite.I want to put in a whirlpool bath, no toilette or sink will be installed. my question is can I just tie into the vent pipe ...
For outside drain pipe what do you suggest abs or pvc
[ 1 Answers ]
I am living in Toronto and the winter time is very cold. I am replacing a drainage pipe outside my home that is broken. I don't know if ABS pipe is better of PVC pipe?
Combining PVC pipe and ABS pipe.Bad Idea Jeans?
[ 15 Answers ]
I'm remodeling a bathroom and mistakenly did my drainage using pvc pipe. My house had ABS, and we used some of the ABS that we cut out together with the PVC. This was all glued together with PVC primer and cement. I didn't realize that the black pipe was not pvc until tonight when I was...
Advisability of bonding ABS pipe to PVC pipe.
[ 1 Answers ]
I'm replacing the sink in the bathroom. The drain pipe extends too far from the wall to match up to the new sink. The original material was PVC. I need to cut it to make it fit, so I'll have to bond a new elbow to connect the trap in the correct location. The replacement pipe parts (elbow, trap,...
Pvc tub drain to abs pipe
[ 3 Answers ]
I have a new white PVC tub drain kit, and I need to install a trap and hook it into an existing ABS drain/vent. The tub drain has a threaded fitting (which the instruction sheet calls "PVC adapter") at the bottom outlet of the T, which attaches to the T with a "polywasher" and "compression nut"... View more questions Search
|