Ask Experts Questions for FREE Help !
Ask
    wolphound's Avatar
    wolphound Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 15, 2008, 03:22 PM
    trane weathertron 239 to hunter 44860 touch screen
    I have a trane weathertron with a heat pump. I would like to install my new hunter 44860 touch screen thermostat. The wiring is as follows:

    Trane

    Green=G
    Orange=O
    Black=x2
    Yellow=y
    Brown=T
    Red=R
    White=W
    Blue=B

    Hunter

    Rc/R- 24vac pwr sply
    C- 24VAC Common
    Y1- Compressor stage 1
    Y2- Compressor stage 2
    W2- Aux heat
    E- Emergency heat
    O- Cool mode powered reverse valve
    B- Heat mode powered reverse valve
    G- Fan
    L- System monitor
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Nov 15, 2008, 03:50 PM

    Its not to late,, take the hunter back and get you a honeywell
    wolphound's Avatar
    wolphound Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 15, 2008, 04:53 PM
    Thanks for your fast answer. I just returned it back to Lowe's.
    I went with a honeywell rth7500d. It was $30 more but the only honeywell I saw that said heat pumps also.

    Thanks again.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #4

    Nov 15, 2008, 05:11 PM

    You will not regret the honeywell. The thirty dollars will last you a lifetime.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring from old carrier thermostat to Hunter 44860 [ 3 Answers ]

Hi! I need help how to wire properly my new Hunter thermostat model 44680 from an old carrier stat that has wires w/ colors red,blue,yellow,green,& white.I have read some wiring combination from other site but want to be sure the proper wiring?I would appreciate any help!thanks! ntmags

Rheem to Hunter 44860 Thermostat [ 7 Answers ]

Trying to replace an old thermostat with a Hunter 44860 and can't seem to get it to work. The wiring on the old Rheem unit is as follows - B - Blue Wire R - Red Wire G - Green Wire Y - Yellow Wire W2 - White Wire X - Brown Now the new unit has the following... note that it does not have...

Converting a Carrier Thermostat to a Hunter Model 44860 [ 3 Answers ]

I currently have a basic contractor installed Carrier thermostat (non-programmable). We wanted to upgrade to a programmable. I went with Lux at first and had to call the tech support, only to have them call back and tell me that my system wasn't compatible. Anyway, here is my current make up on...

View more questions Search