Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Briggs 14.5 OHV Engine only runs when choked
[ 1 Answers ]
I have a 14.5 OHV Engine that will only run when fully choked. I am thinking this is a carb problem. I have taken carbs apart and cleaned them on smaller engines but the 14.5 looks a little harder. Can anyone give some tips on taking this thing apart and cleaning it. Does it sound like I am...
Briggs starts runs and dies and restarts
[ 2 Answers ]
Hello everybody I have a briggs model 310707 type 0137-e1 Code 020208ZE It starts, runs for a while then starts to sputter spit and sometimes backfire and quit After it quits it has spark but there seems to be a abundance of fuel in the top of the carburetor. It has a NIKI carburetor. It has a...
High-speed Cable/low Speed Operation
[ 1 Answers ]
I had Time Warner Cable(TWC) Road Runner service(high-speed cable) installed recently on my Panasonic CF-47 Laptop. It turns out that it operates two times SLOWER than Dial-Up!! I have a W98 O/S. The High-speed cable into the computer measures normal(as measured by a super-tech with TWC). After he...
Briggs & Stratton 15hp runs rough at high speed.
[ 2 Answers ]
I have a tractor mover with a Briggs & Stratton 15hp, it runs good at lowest speed only, unless I put it at full speed and full choke, it backfire out the muffler and shuts down at any other speed. I ran through the carb, seems clean unless I missed something, the float was stuck and it would...
Briggs Only Runs While Priming
[ 1 Answers ]
I have a 5 year old Craftsman mower with a Briggs & Stratton 6.0 that recently started acting up. It fires and starts when I prime it but I have to keep priming (one hand on the kill lever, one hand on the priming pump) to keep it running. This past Spring it had a similar problem but if I kept... View more questions Search
|