 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Mimaki CG60-st
I am running a Mimaki CG60-st cutter with Graphix Advantage 6.21 The plotter will test cut from its own control panel but zip from the computer. All Com port settings are matched to the set-up settings in the program but no response when I press the remote button. The cutter was working fine and just stopped. I have tried it on other computers, same result. I have a Roland GX24 but cannot set it up in Graphix Advantage which I find easy to work with. Can anyone help with a solution please, I cannot find anyone in our city that does repairs on Mimaki equipment.
|
||||
Check out some similar questions!
My mimaki plotter cutter is slow cutting circles 15m/m dia and smaller. Is this a common fault or do i need to reset the machine settings
I have a cg160fx plotter, when I turn the machine on it comes on with a "start set-up" icon. I cannot get it to come up with the "roll sheet" icon. Nothing in troubleshooting shows me how to correct this in the manual. Can anyone help?
When turn plotter on display message comes up !err-pen looked in manual nothing in error messages troubleshooting. Don't know if you can help me or came across this before.
I have a cg160fx plotter, when I turn the machine on it comes on with a "start set-up" icon. I cannot get it to come up with the "roll sheet" icon. Nothing in troubleshooting shows me how to correct this in the manual. Can anyone help?
I have mimaki cg-61 plotter, I received an err 20 I/O. Can anyone help me resolve this err?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
