Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How can I get the escutcheon nut off? It is STUCK STUCK STUCK!
[ 4 Answers ]
After 20 years, I'm changing out the kitchen faucet. Everything is disconnected except one very very tight nut. It's about 2/3 off. The gripping edges are broken. I've tried and tried with the plumbers wrench, but it won't budge. Part of the problem is that everything else is disconnected so...
Can I purchase touchup paint for the frame on model #4450
[ 2 Answers ]
Touch-up paint - I have the Glacier Bay medicine cabinet model #4450 & the paint on the mirror frame needs to be touched-up especially at the corner where I open the door. If I can't purchase the paint, can you give me the color numbers that I can give to Home Depot to make for me?
John deere transaxle
[ 4 Answers ]
I'm having problem with me L120 John Deere once it gets hot it won't climb hills I know for a fact its not the belt I replaced it and it is routed correctly I was told it was a valve problem and that the transaxle is sealed but this is not the case I was able to separate the transaxle by removing...
Transaxle lubricants
[ 2 Answers ]
I have a ford yt16 Lawn tractor. I have repaired the transaxle but I'm not sure what to use as a lubricant. Some say grease and others say 120W gear oil. What should I use ? Thank you.:confused:
Trouble shoot transaxle
[ 2 Answers ]
Hello, dave from Wisconsin, I have , I believe to be a 1993 sears lawn mower with a spicer transmission in it. The model for the lawn mower is-- 502.255090 serial no. 28403837. When I tied putting the lawn mower into any gear the mower would not move, I checked the belts and they're fine , I... View more questions Search
|