Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
installing 18x33 above ground pool on unlevel surface
[ 1 Answers ]
I have a frame built out of 2x6 that is level across the top, but 5"deep on one end and slopes down to about 11 inches on the opposite (long) end on the ground surface itself. I was thinking of using all masonry sand for backfill. which would make the underneath of the sand pad un-level but the top...
Aqua Leader Pool developes rust/holes on outside
[ 1 Answers ]
Greetings, We installed an above ground, Aqua Leader pool in 2002. Oval - 15 x 33. We live in PA. This past February, I discovered a small hole about a foot up front the ground. Hole was about 3/16" and water was coming out onto the snow. Pool surface was frozen for the most part. We patched...
Pin holes in an above ground pool
[ 2 Answers ]
I have a 24ft above ground and am finding pin holes on one side of the pool. I patched two but have found four more. The linner is two years old and otherwise in great shape. The pool store told me that it was from nut grass. I pulled an article online to get a visual of what I was looking for...
Rust holes
[ 1 Answers ]
Can you fix rust holes in frame near rear wheelwell on a 1994 honda civic ex View more questions Search
|