Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Is 2.5 inches off level too much for an Intex Ultra frame pool 16 by 48
[ 3 Answers ]
I brought in sand and leveled it all day and used a 2 by 4 and level like the video's showed. It was level until I put up the pool. Some of the legs on the high water side sunk into the sand and I guess the sand must of settled. I measure both sides and it off 2.5 inches in a small area but 2...
Intext above ground pool unlevel about 3-4 inches
[ 0 Answers ]
We just bought a n intent 18x42 above ground pool and put it up and now the pool is almost full and you can tell there is about a 3 inch difference on one side. Is this dangerous or could it make it through the summer?
Gunite pool rose 9 inches out of ground
[ 1 Answers ]
Had pool painted its 30 years old had no water for last 3 years . We've had a lot of rain. Pool rose 9 inches . We have filled pool with water it is 4 inches above original level but 4 inches higher at one end .no apparent leaks but haven't tried filter yet what next will it settle more insurance...
Above Ground Pool Not Level
[ 1 Answers ]
We are in the process of installing our 15 x 30 x 52 oval above ground pool. We have just put the wall up. We spent many hours trying to get it level and thought it was almost perfect... until we put the wall up and now we can tell that in some places it is off about an inch and one area is off...
Level above ground pool
[ 3 Answers ]
I have reviewed some answers re: leveling above ground Pools. I have used "all purpose sand" vs. "play/beach sand" Will this sand be OK before I actually lay down the ground liner? View more questions Search
|