Ask Experts Questions for FREE Help !
Ask
    wally16's Avatar
    wally16 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 18, 2017, 09:25 AM
    Craftsman radial arm saw does not cut, motor only hums
    Blew fuse when power turned on and kept on for a few seconds
    Reset button does not click
    Can turn saw by hand with power off
    Saw will not cut when power turned on
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jul 18, 2017, 01:54 PM
    Grounded armature, shorted brushes, bad motor windings.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Old Craftsman Electronic Radial Arm Saw - Motor not working! [ 2 Answers ]

I have a Craftsman electronic radial arm saw which I bought in the late 80's. The motor hasn't worked for the last several years! I just get a buzzing sound and the blade doesn't turn! I had a Sears technician in last week to look at it and he took the cover off the motor and told me that it was...

Resolution of forces acting on pistons in case of radial piston type hydraulic motor [ 0 Answers ]

In hydraulic terms, formula for power (kW) of pump and motor of any type is kW = QP/600 (Efficiency ignored for simplicity) Where, Q = Oil flow rate (lit/min) P= Pressure (bar) In case of radial piston pump or motor of particular type in which pistons are...

My fan motor just hums [ 1 Answers ]

My ac fan motor just hums, could it be the thermostat Thermostat is a white-rodgers model 1f56w-444

My fan motor just hums [ 2 Answers ]

Thermostat or fan motor humming only

Fan motor hums [ 2 Answers ]

My Hampton Bay ceiling fan has worked well for 10 years. But now the motor hums and the blades won't turn. This is true for all 3 speeds.

View more questions Search