Ask Experts Questions for FREE Help !
Ask
    rooster10213's Avatar
    rooster10213 Posts: 3, Reputation: 1
    New Member
     
    #1

    Aug 15, 2010, 10:25 PM
    Blade drive belt replacement
    I inherited a Honda Harmony H1011H from a friend who moved to the condo.
    He was using MTD V Belt to rplace the Honda blade belt. Now it is time to replace again. Is the spec.for the Honda parts available any where (including Drive Belt 76184-772-003)? Is the MTD V belt 754-0280A the same spec. to Honda7681-772-L02 Blade Drive Belt?? It would be a littlle easier to find MTD Belts in our area than Honda Belt.
    Appliciated if any one can help... Thanks...
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Aug 16, 2010, 08:32 AM

    Hi,
    Cannot answer precisely since I am unable to get the Honda spec. The MTD number is a front Transmatic belt that is nominally 53" though it is dependent on the designation of the belt(L, A, etc.)
    In a nutshell if the MTD belt works, have at it. You may want to see if a supplier in your area carries Kevlar belts that are 5/8" x 53" to save a little. The MTD belt is sheathed in Kevlar, so nothing else should be considered.
    Peace,
    Clarke
    rooster10213's Avatar
    rooster10213 Posts: 3, Reputation: 1
    New Member
     
    #3

    Aug 16, 2010, 08:36 PM
    Thanks very much crigby:

    I have check with Honda web and dealer but unable to get any spec. on the HONDA belt or any cross ref. with other make or sizes for substution. I was told by one dealder that the HONDA Belt should not be substitue with other belt since the sizes spec. are not the same (ie.. Honda belt is wider and thicker than MTD) and can cause damage to the deck pulleys and will not work as well(prematurely worn out/breake) because it will not fit properly.
    Well... I guest that I need to try to find the Honda spec. or some cross reference and finally try the MTD again...
    Thanks
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #4

    Aug 16, 2010, 09:32 PM

    I tried too and was unsuccessful.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman LT1000 blade belt replacement [ 1 Answers ]

The LT1000 blade overheated and broke, probably from grass accumulation. I purchased a 42" Craftsman belt to replace it, but I cannot located the procedure to get the belt back on all the pulleys... HELP PLEASE

Craftsman tractor lawnmower;blade belt replacement [ 1 Answers ]

Trying to get the belt around the brackets that hold the deck

Replacing a Snapper blade drive belt [ 1 Answers ]

I have a 28" Snapper riding mower, and I am attempting to replace the blade drive belt. It appeared straightforward at first, but how do I get the belt around the drive wheel? Do I have to remove the drive wheel entirely? Or is there another way? Thanks.

Craftsman lawn tractor blade belt replacement [ 2 Answers ]

Okay, how do I get the belt onto the pulleys? Is there something I need to do with the deck? This is a craftsman 14hp lawn tractor model #917-255694. Is there a website that I can download the picture or instructions from a manual? I am having trouble trying to figure out how to get the belt...

Need belt diagram for craftman blade drive pulleys? [ 1 Answers ]

My father has an older Craftman riding lawn mower 18 hp twin don't know the model number cause I can't find the owners manual and the mower has been repainted. Blade setup is 42". If anyone can help me it will be greatly appreciated. And if possible could someone tell me where to even begin to...


View more questions Search