 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Deck belt for craftsman 15.5 riding mower
I have a 8yr old craftsman riding mower with a 42in deck I went to get a belt and I got the right one but I can not get it to go on do I need to remove any of the pullys or are there any tricks that I need to know or should it just go right on it is about 3inches to small. And I did disengage the blades but still will not fit
|
||||
|
||||
|
Yes disengage the blades and look for a pulley that is not directly above a blade. This would be your tensioner pulley and it is spring loaded to apply tension to the belt. It is moveable and should give you the room needed for the belt.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I recently went out to mow my lawn with this otherwise reliable machine. I pulled the PTO clutch switch to engage the blades. They started to rotate and I was on my way, for about 30 seconds and then the blades stopped rotating. The motor runs perfectly yet the drive unit for the blade belt does...
I Have A Craftsman 11 Hp Riding Lawn Mower That Won't Even Crank.I Have A Good Battery Clean Posts,power To The Starter But When I Push Clutch In To Crank,nothing Happens.what Am I Doing Wrong?
How do I replace the mower engage cable on a 42" craftsman lawn mover deck?
We just purchased a new Craftsman 26HP, 54" cut, riding mower. One of the front wheels does not point straight ahead, it is pointing inward. When we called the help desk, we were told it was engineered this way so that the mower would make tighter turns. Is this true? (The steering wheel is...
I bought it used it seemed OK,but now I have loss of power.I NOW have a brand new battery.What can I do to the engine or carburator to fix problem?How do I properly adjust carb?Should I overhaul the engine?I haven't found a rebuild kit for my B&S engine(14.5) Any help would be great.Somone told me...
View more questions Search
|
