Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace blowing but no heat/ only cold air
[ 3 Answers ]
The furnace that I have has the round thermos stat, when I turn it to 80 or up the furnace don't ignite, but if I. Go to the furnace it's a button to turn on manual, it start blowing. Now as the furnace is blowing its cold air coming out the ducks, an the pilot light is lit, what can I do?
Need help: Furnace blowing, but no heat
[ 1 Answers ]
This morning I woke up to my house feeling colder than normal. I looked at the thermostat and even though the house was still set at the typical temperature, it was 10 degrees colder. The furnace seemed to be blowing cold air. So I turned the thermostat off so that I could go look at the furnace...
Furnace blowing cold air and shuts off
[ 3 Answers ]
My furnace is blowing out cold air some of the time. I went down and took off the panel and turned the power switch off, then back on. It goes through the normal sequence to light the burners: The fan kicks on then the igniter switch heats up, it makes some clicks, then the burners come on. As...
Furnace warm but no heat blowing
[ 1 Answers ]
My furnace is a gas hot air furnace. The furnace feels warm to the touch, and the heat pipe from the furnace is very warm, but the blower is not coming on no matter how I set the thermostat. Is it likely the blower motor or the thermostat? I can feel that the baseboard heater in the bathroom is...
Thermostat Calling for Heat but Furnace Shuts Off
[ 6 Answers ]
I have a gas forced-air furnace 3-5yrs old. Honeywell setback type thermostat (set to "HOLDTEMP") My problem is the furnace seems to shut off before it reaches set point (ussually 4-6 degrees below set point) I changed the thermostat and still the same issue. If I turn the power off to the... View more questions Search
|