Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
White Rodgers Model 50A50-241 Control Module
[ 0 Answers ]
I nedd to find a web site that I can download a wiring diagram for a York AC & heating unit with a White Rodgers 50A50-241
White Rodgers control board 50a50-471
[ 0 Answers ]
Board died, replaced it with 50a55-843. Put in ro1/ro2 jumper. When I turned it on both the inductor motor and the blower came on. The furance fired up but after 1 minute the blower turned off. It reached high temp limit and shut down. Anybody have any ideas?
Help with a White-Rodgers Model 50A50-471 Furnace Control Board
[ 0 Answers ]
My Problem: My furnace is pumping out tepid cool air Last night my house started blowing tepid cold air. I turned the heat down until it "clicked" off from the thermostat in the main room. I went down into my basement and opened up my furnace. I had not changed the filter in the last 3 years...
Servicing a 50A50-110 furnace Control
[ 1 Answers ]
My controller shuts the burner off after 1 to 1-1/2 minutes. Indications are the flame sensor circuit is causing the problem, since the sensor line shows a positive voltage When the burner turns off, and the LED indicates ""AC POWER REVERSED". When the Unit is cold, the line reads zero volts....
50A50-110 Control Board
[ 2 Answers ]
I have a 1995 ComfortMaker, forced air, NG, 80% efficient, furnace with a 50A50-110 control board. The original board was replaced in year 3 under warranty. I am now having regular problems with the furnace going out. The trouble light on the control board blinks from one to six at varying times... View more questions Search
|