 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How Do I Trouble Shoot A Boiler?
MY central heating boiler light is on but there is no hot water and the heating won't work either. I know there is a red re set button which I have tried pressing for 3 seconds then turned the heating back on but it didn't work. Any advice? Thanks.:)
|
||||
|
||||
|
I asked the mods to move your question to heating and cooling. More details of the system would help. When the thermostat calls for heat, the system will begin an ignition sequence and then turn on the gas, and the pump. If the pilot light is out, the ignitor doesn't work, the gas doesn't come on and light, the pump doesn't start, etc. the system will shut down and yours lights the light. You need to start up the system and see how far it goes before shutting down. Then check the next component. Post back with more info for more help.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb Bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb Bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb Bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb Bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb...
Hello, dave from Wisconsin, I have , I believe to be a 1993 sears lawn mower with a spicer transmission in it. The model for the lawn mower is-- 502.255090 serial no. 28403837. When I tied putting the lawn mower into any gear the mower would not move, I checked the belts and they're fine , I...
I have a boiler that some times just doesn't want to kick on, With out just a little help (a tap from the back of a screw driver will do) It looks like some kind of switch or control or something, it has what Look like points that seem to make and break contact as I tap on this Thing, then...
View more questions Search
|
