Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Carrier furnace: limit switch fault furnace has ignition but blower will not come on?
[ 2 Answers ]
Board says it is a limit switch fault Furace goes into pre ignition, fan comes on and sometimes even the main burner ignites, but the blower will not come on... is this the blower motor or could this be a switch somewhere?
My york furnace is reading a fault #9(Grounding or reverse polarity fault)?
[ 0 Answers ]
My furnace is reading a #9 fault, which the legend says it's a grounding or reverse polarity fault. I have power in, 120V at the transformer as well as 24V, there is a call for heat and 24V at the R & W terminals. Is there any input anyone can offer me? Thank you.
Carrier furnace heat works, ac comp. Goes on blower does not come on. No fault codes
[ 0 Answers ]
I have a carrier furance the heat works, the ac comp. goes on when I turn the air on but the blower does not come on. There are no fault codes.I can take out the thermostat jump the wires and switch off sw-4 on the control board to turn on what they call emergency heat. Then the blower comes on. I...
I had accident last month.It was other guy's fault.no police report.he says my fault
[ 13 Answers ]
I had accident last month.It was other guy's fault. He admitted it. So I didn't call the police & no police report. After filing the claim with his insurance company, he has said that it was my fault. So his insurance company denied my claim. They say that they denied the claim because there is no...
Nordyne model KG6RC 100C-20B furnace, fault code 2 blinks, how do I repair?
[ 1 Answers ]
I have a nordyne model KG6RC 100C-20B furnace. Woke up this morning and the blower is not coming on. The red light on the circuit board is blinking twice in a row every few seconds. I found the code which reads-2 blinks. Pressure switch is open with inducer fan on. What is the best way to repair? View more questions Search
|