Ask Experts Questions for FREE Help !
Ask
    jimmeymac's Avatar
    jimmeymac Posts: 3, Reputation: 1
    New Member
     
    #1

    Mar 2, 2013, 04:38 PM
    Gas valve cross reference chart
    Where can I find a cross-reference chart for a B57RBA601 valve
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Mar 2, 2013, 06:07 PM
    No valve of that number listed in all the info I have. Post brand and model number of valve and the brand and model number of the equipment it is on and I will check from there.
    jimmeymac's Avatar
    jimmeymac Posts: 3, Reputation: 1
    New Member
     
    #3

    Mar 3, 2013, 09:47 AM
    Thanks HVAC1000 for your response. The valve is on an older LENOX furnace
    Model number G8-110-4 Thanks
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #4

    Mar 3, 2013, 11:29 AM
    Quote Originally Posted by jimmeymac View Post
    thanks HVAC1000 for your responce. The valve is on an older LENOX furnace
    model number G8-110-4 Thanks
    Here is a web site for you. If anyone has something for that 1960 era furnace they will. They show a gas valve replacement and a motor for your unit. Call them for parts. If it were me I would not be fixing it since it is way over the time when due for replacement and other parts you may need might not be available at all. Hit search below.

    Search

    866-536-6691
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #5

    Mar 3, 2013, 12:54 PM
    I agree with hvac1000. With a unit that old, even though there may be some universal parts, such as gas valves, etc, you are dumping money into a dying horse. Of course, this is your choice, but I would certainly start putting away for an upgraded system in the near future. Good luck and please let us know how things work out.
    jimmeymac's Avatar
    jimmeymac Posts: 3, Reputation: 1
    New Member
     
    #6

    Mar 6, 2013, 06:28 PM
    Thank you all for the info and advice,managed to get a replacement valve-HONEYWELL-VR8200-H-1236-working good
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #7

    Mar 7, 2013, 04:07 PM
    Thanks for the update.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas valve cross reference [ 0 Answers ]

I have a westwood wall furnace model C35SD1 that has an ITT General Control gas valve no. TV27RB21. Is there a cross reference to another one?

Honeywell gas valve cross reference VR8440M6009 [ 2 Answers ]

I have went to honeywell cross reference sites and the M#VR8440M6009 is not even mentioned but I know it exists as I am holding it in my hand.

Cross reference honeywell smart valve numbers with any manufacturer [ 0 Answers ]

Have a honeywell smart valve sv9570A2054 for water heater Cannot find reference to this model number on honeywell website other than Installation instruction manual from 8/2006 Need to find which smart valve replaced this one

Is there a cross reference chart for Haban Belts? [ 0 Answers ]

I have a Haban 42" Front Mount Snow Thrower Model #24577. I need to replace one or the other of the two short belts original Haban # 10371 or #19678. What do I need to buy?

Gas valve cross reference [ 9 Answers ]

I have an heil warm air furnace,with a smartvalve gas valve.sv9500n2674... can't find exact number gas valve.only one I found was an sv9501m2813 says replaces all sv9500 valves.can anybody verify this is true.new in the hvac field not too sure.this natural gas unit,not lp.


View more questions Search