Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   T-start fan on/furnace blower on, AC w/fan on/auto, blower off (https://www.askmehelpdesk.com/showthread.php?t=388260)

  • Aug 18, 2009, 05:38 PM
    zhuroy
    T-start fan on/furnace blower on, AC w/fan on/auto, blower off
    If no cool or heat, just fan on, there has blower start in furnace;

    While in air conditioner, regardless fan on or auto, there will be no indoor blower on at all;

    While outside condenser and its fan seems fine.

    I lready jump wires G, RC and Y in T-start, won't see any difference.

    By the way, yesterday it suddentely worked for a minutes or 2 before it is completely dead after I lower the temprature.

    Thanks for your advice
    Roy
  • Aug 18, 2009, 08:46 PM
    wmproop
    Since we don`t know the name or model number of your airhandler/furnace all the answers you receive will be guesses but you might,just might have a bad fan control and again not knowing what you have I don`t know how to tell you if you have a separate control or if its bult into your circuit board or even if you have a circuit board
  • Aug 18, 2009, 08:50 PM
    zhuroy
    Quote:

    Originally Posted by wmproop View Post
    since we don`t know the name or model number of your airhandler/furnace all the answers you recieve will be guesses but you might,just might have a bad fan control and again not knowing what you have I don`t know how to tell you if you have a seperate control or if its bult into your circuit board or even if you have a circuit board

    Thanks for the quick response

    The gas furnace: Lennox G24M 3/4-100A-7
    SN:6398B17474

    It has circuit bord.
  • Aug 19, 2009, 04:59 AM
    zhuroy

    A bit confused:

    1) fan is on when cool and heat off, does that mean indoor blower moto and its capacitor good?

    2) do I need to jump wires G, RC and Y in furnace circuit board to try?

    Tks
  • Aug 19, 2009, 05:21 AM
    zhuroy

    Just confirmed anther thing -
    If T-stat fan in on position, heat in on position, or heat and cool off, furnace blower will start; only switch T-start to cool, when outside condenser is started, the furnace blower will be immediately stopped.
  • Aug 24, 2009, 08:39 PM
    bonnie53
    My air conditioner will not blow cold air. The unit outside is not running. We had the artic air guy out. Replaced compressor, and fuses and breaker. Worked great for 2 months now the unit outside is not working while air is blowing in the inside. Any ideas what can be wrong
  • Aug 24, 2009, 08:40 PM
    bonnie53
    My air conditioner will not blow cold air. The unit outside is not running. We had the artic air guy out. Replaced compressor, and fuses and breaker. Worked great for 2 months now the unit outside is not working while air is blowing in the inside. Any ideas what can be wrong[/QUOTE]
  • Aug 24, 2009, 08:43 PM
    bonnie53

    My air conditioner will not blow cold air. The unit outside is not running. We had the artic air guy out. Replaced compressor, and fuses and breaker. Worked great for 2 months now the unit outside is not working while air is blowing in the inside. Any ideas what can be wrong. I HAVE A LENOX HS26 SERIES 3 TONS
  • Aug 25, 2009, 06:19 PM
    wmproop
    bonnie53,, you need to start a thread of your own,
    Getting in on someone else's thread will not get you any responses,, sorry

  • All times are GMT -7. The time now is 10:30 AM.