Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet Flange Question
[ 1 Answers ]
I am currently remodeling my bathroom and I need to fix or replace the toilet flange. The old one is cast iron and broken on one side. My bathroom is currently gutted, walls and floor. I guess my question is should I replace it, since I have no flooring down and if so, how do I go about...
Height of toilet flange above new tile - additional question
[ 1 Answers ]
Hello... I just read the question (posted July 18) on this subject and the answer by rickj. I was glad to see it and agree with everything, but when looking at the bottom of my new Kohler toilet, it seems that the 1 inch thick wax ring is going to have to be compressed down to only about 1/8...
Toilet flange
[ 1 Answers ]
I am installing tile in bathroom so the toilet flange is now about approx. 1/2" below the tile. Do I have to remove the toilet flange or are there extensions?
Toilet flange too low
[ 1 Answers ]
I discovered a leak in the base of the upstairs toilet that had soaked the subfloor and cause the tile to come loose. I removed the tile and discovered that it had been set on a plywood backer. I removed the plywood and cut out the rotting wood around the toilet. This exposed the ABS plumbing...
Toilet flange
[ 5 Answers ]
I am in the process of re-settin my toilet, It is located in the basement and the toilet flange sits on top of the ceramic tile. It is not flush with the tile. I have reset the toilet three times using various thickness of wax. These only last so long. I have purchased a wax free bowl gasket... View more questions Search
|