Ask Experts Questions for FREE Help !
Ask
    chaseramsey's Avatar
    chaseramsey Posts: 29, Reputation: 1
    New Member
    		  
    #1

    Mar 7, 2011, 01:24 PM
    I have a 2003 Honda and I'm replacing the brake pads it came with shims what are they
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Mar 7, 2011, 01:45 PM

    They help eliminate noise. This link should help:

    https://www.askmehelpdesk.com/cars-t...ml#post1618425
    chaseramsey's Avatar
    chaseramsey Posts: 29, Reputation: 1
    New Member
    		  
    #3

    Mar 7, 2011, 01:59 PM
    Where do the shims go on my brake pads
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #4

    Mar 7, 2011, 02:14 PM

    If you buy Wagner ThermoQuiet Ceramic pads, which I recommend, you don't even need shims. Otherwise, the shims fit over the metal backing plate to the pads. When you remove your current pads, it should be more clear.
    chaseramsey's Avatar
    chaseramsey Posts: 29, Reputation: 1
    New Member
    		  
    #5

    Mar 7, 2011, 02:33 PM
    Do the shims just go on the inside brake pad
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #6

    Mar 7, 2011, 03:59 PM

    No.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Should Rotors be changed with brake pads every time? [ 7 Answers ]

My Saab dealer tells me my rear pads are wearing down and says the rotors need to be changed out too, apparently because they cannot be "turned". What does that mean? Or is this a way for car dealers to mark up prices. I also remember my sister complaining that her VW needed the same kind of...

Tools needed to replace brake pads 2007 camry se [ 8 Answers ]

Are there any special tool required to replace rear brake pads and or rotors on a 2007 Toyota Camry SE 6cyl. Didn't know if I needed anything special to colapse the pistons to replace the pads. Thanks, Craig

2007 masda 6 replacing front pads [ 2 Answers ]

My sons 2007 Masda 6 needs front pads. Is there anything tricky? I've never messed with a masda and was concerned about ABS. I was planning on backing out the bleeder nut before compression to keep from backflow? Does this sound right? Thanks!

Change rear brake pads 03 Honda Accord [ 1 Answers ]

How do I change the brake pads on my 2003 Honda Accord

Brake pads and caliper for 93 accord [ 2 Answers ]

I am attempting (first time) to replace brake pads on the rear of my 93 honda accord. I got everything off and it seems pretty straight forward. My problem is I can get the caliper piston retracted. I have tried turning it with a pair of needle nose pliers and I have tried a big c-clamp. The...

View more questions Search