Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Drain is gurgling in lower level of split level
[ 1 Answers ]
Spent 14 hours removing toilet to run power auger into drain. No luck went about 35 ft. then the cable in the drum decided to twist on itself. When other water is drained it comes up through the hole in the floor(figure this is path of least resistance). Is it my vent from the roof or do I need to...
Raising the level of a caste iron toilet flange to the level of the floor tile.
[ 1 Answers ]
I have a similar problem as the person in a previous post. I installed one of those twist and sets PVC flanges right on top of my old caste iron flange but the top of the twist and set is still 3/8 inch below the tile. I am wary about using a double wax ring. Can I install one of those flange...
Ink level on printers lost ink level option
[ 1 Answers ]
I have a HP Deskjet 950C and HP Phttosmart 7550 printer. Both printers have lost the option to see the ink levels. Is there a way to get this option back.
Nice on main level, hot on upper level
[ 4 Answers ]
We live in a house that is 5 yrs old. With the A/C on, the main level of the house is very comfortable yet the upper level where the bedrooms are doesn't seem to cool down at all. I'm thinking that it has something to do with the duct work which won't be an easy fix. Could there be any other... View more questions Search
|