Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cutting through cast iron How is it possible to cut through a cast iron soil pipe
[ 6 Answers ]
Cutting through cast iron How is it possible to cut through a cast iron soil pipe
Tap into Cast Iron Vertical Stack
[ 11 Answers ]
I am considering taping into one of my cast iron stacks to add a drain. The cast iron is in very nice condition and has no problem. It runs into concrete on the bottom, the other side of the pipe has extensive plumbing connections attached to it, then it vents. Would the best thing to do be to...
Cast Iron Vent Stack
[ 2 Answers ]
I have just purchased a 1950's rental property with a cast iron vent stack. The insurance co. wants me to replace it as they are prone to leaking in older homes. The job seems fairly straight forward, but do you have to replace the elbow/cleanout at the bottom that is cemented into the basement...
Cast iron soil stack to pvc
[ 15 Answers ]
the plumbing in our house is from 1936. We noticed a large stain in the ceiling, tore it out to reveal the cast iron soil stack (runs from the upstairs bathroom turns a corner then runs straight to the basement) and found the leak was around (very bad leak) the lead joint. My husband finally got...
Cast iron vent stack
[ 7 Answers ]
I'm installiing a new basement bathroom and when running a vent stack I would like to tap into the existing cast iron with PVC using a saddle on the cast. My question is what method is used to cut a hole in the cast iron, where I wish to place the saddle and connect the PVC. View more questions Search
|