Search:
Type: Posts; User: debodun
Search:
Search took 0.00 seconds.
-
Had a plumber replace washer assembly (Delta RP4993) on the hot water side. It was good afterwards for about 2 weeks, now it's dripping again - not as much as before, but it shouldn't drip at all....
-
I have a GE CarryCool I bought in 1983 and gave good
Service until last year when it started putting water
In the 5 inch gap in the window sill between the inner
And outer windows. I like the...
-
I don't think the supply line is the problem. The water enters the tank just as quickly as it before the valve installation. The problem is in the float cup if the shut off valve.
-
I'm not sure how to straighten the feed hose - it the shortest one (12") and the distance from the top of the shut-off to the bottom of the tank is 8".
-
It usually shuts off the water well below the overflow tube. I don't think there's any problem with the flapper. My flapper is not a rubber disc I see in most photos of toilet innards. It's like a...
-
-
-
I had a shut-off valve installed on the toilet so I don't have to run down in the cellar to shut off the main line. After the handyman installed it and we did a test flush, the tank refilled much...
-
-
I think the innards of one or both of the faucets need to be replaced, that why I have a drip. I wanted to know what part number the Delta faucets are.
-
My shower started dripping out of the head. I called a plumber, but he said that the fixtures are so old, parts may not be available any longer. He also indicated that most showers have a single...
-
I have a portable window unit (I can't say what brand or model it is right now as I am not where it is right now), but I can say that it is an older one, perhaps 15 to 20 years old. This year I...
-
-
I have old wooden frame sash windows with weights inside the walls beside the windows. However, The ropes attached to the window and the counter-weights had become worn, some even had broken, so I...
|