Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Thermostrat has no power, check a/c unit found 3 amp fuse blown, replaced fuse, still
[ 1 Answers ]
Thermostat has no power, check ac unit, found blown 3 amp fuse on circuit board, replaced fuse, still no power. Went outside to unit, removed cover found two terminals touching, separating terminals, rechecked no power still.
I have a troybilt rider. That keeps blowing the fuse .
[ 2 Answers ]
I have replaced the solenoid,the switch.checked the wires none burned are Broken.that I can see. Charged the battery.disconected the starter hot wire It still blows the fuse. When you turn the key. Disconected the wires under the Flywheel it still won't start are even click just blows the fuse
My problem is for whirlpool gold dryer ,I change the thermal fuse,thermister fuse
[ 0 Answers ]
I have whirlpool gold dryer 10 years old all lights are on but when push start it only clicks ,I change thermal fuse ,and thermister fuse CHECK DOOR SWITCH still clicks is it the main board if any suggestion will be appreciate thank you
Bryant furnace secondary fuse open fix after humidfier intstall - where is fuse?
[ 0 Answers ]
Bryant 383KAV024070AGJA furnace not working after intall of Honnywell humidifier 360 (pered fan). Flashing LED 2-4 suggests "24 v secondary fuse open". How do I replace/reset fuse and how do I wire the Humidifier correctly this time?
Lost power in three rooms, changed fuse, swaped with a fuse I know works and still?
[ 1 Answers ]
The fuse box is an old school with the 15 amp and 20 amp screw in fuses. Everything else in the house works and I have changed it out a ouple of times with a fuse that does work what would be my next step? View more questions Search
|