Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to level a swimming pool
[ 2 Answers ]
I need help with my above ground pool. I ti all set up and I had it halfway full and the wall came off the track in some places and the pool was not level. It was about 3" off on one side. I took the water out and the liner half way and tried to fix the wall but it is not going to well. It is...
Shocked in Swimming Pool
[ 3 Answers ]
Last summer I was shocked while using my inground swimming pool. The pool is probably 35 years old. We have owned the house for 18 years. After I was shocked, an electrician came and found that there was no GFI nor was the pump grounded. Thought it was fixed. Earlier this year, after sticking...
Electricity in my swimming pool
[ 9 Answers ]
When you are standing in my in ground swimming pool, and your hands are wet, and you touch the hand rail you feel a mild shock. When you stand in my swimming pool and put your tongue on the handrail it resembles putting your tongue on a nine volt battery. There is another handrail in the deep end...
Swimming pool sub panel
[ 1 Answers ]
I am installing a 100 amp pool sub panel for an inground pool. I am running #4 thwn in pvc from the house to the sub panel. My question is can I put a junction box in my basement and convert to #4 romex to the main panel. Question #2 Do I attach the #8 bare bonding wire to the ground bar of the...
Swimming Pool
[ 1 Answers ]
I am building a peanut shaped pool 20x40 (3-8ft.) with a water fall in the middle and 4 deck jets. Two in each corner. Iam thing 2 skimmers and 4 returns? Also I would need an auto water leveler and suction for cleaning system. Looking for a drawing on how to plumb. There is no heater or spa. 2... View more questions Search
|