Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Instaling a shower in a basement
[ 2 Answers ]
So I bought a old home with a finished but not furnished basement. Unfortunately the shower was not installed. So I asked around and so far I have the hole leading to the sewers all done and the drain installed. Now I need to know if I have the rest correct: I'm going to fill the space between the...
Instaling a halogen light
[ 3 Answers ]
OK -i have a problem.. I have a electrical box with 2 single pole(I believe)switches with one switch(left )has two black wires and a ground which I'm not sure what it controls what outlet in the room and the next switch(single pole?)with a red wire and black wire(hot?)going into the switch.Both...
Diagram for instaling belt on 42" craftsman mower
[ 1 Answers ]
Please direct me on how to install two belts and which belt first?
Instaling 2 shower heads/regulator
[ 1 Answers ]
I wanted to install 2 shower heads with independent controls for temperature on each side of my shower. 2 people could use the same shower and have their own shower head and setting. I would use the same hot/cold feed to split from, and was wondering if the pressure and/or temperature would be...
Instaling new flange
[ 1 Answers ]
We bought a house and my wife wanted tile floor. So we took out the existing toilet and installed tile. When I went back to replace the toilet I discovered that the existing flange was installed incorrectly. The slots for the bolts were up and down instead of left to right. Because we have a... View more questions Search
|