Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing the lower light on a Hampton Bay Windward III ceiling fan
[ 3 Answers ]
At least that's what I think I have. I have the remote instructions, but seem to have lost the fan instructions. It's the white fan with the Gossamer Wind blades. The lower fluorescent light has become intermittent. Sometimes it will turn on, sometimes it won't. Less frequently, it goes out...
Replacing a ceiling fan with a standard 2 bulb light fixture
[ 3 Answers ]
After removing the ceiling fan there were two cables of wire coming into the junction box in the ceiling. One cable (I think from the wall switch) has a red, black, white, and bare copper ground wire. The other cable in the junction box has a black, white, and bare copper ground wire. When I...
Where does this wire go?In a ceiling fan light
[ 10 Answers ]
Ok this has probably been answered. But I have not read all the posts/ I just found this sight while researching what I am about to ask.. I have wired three ceiling fans to plug in to wall receptacles.. as there are no wire to hard wire them in in my home and I am poor and cannot afford an...
Loose wire in ceiling fan light kit area
[ 3 Answers ]
I have an old ceiling fan and recently wanted to add a light kit. When I took the cover off there was a loose red wire inside. It looks as if it had been in a wire nut because the ends were twisted. The red wire was alongside a blue wire that came from the fan's speed control switch where the pull...
Need help replacing a 5-8 wire ceiling fan switch.
[ 1 Answers ]
I am trying to replace a 3 speed, 5-8 wire fan switch with a Harbor Breeze switch. The old switch has numbers 1-Blue wire, 2-Red wire, 3-Orange wire, 4-? and C-Black wire. I don't know which wire was in 4 as it fell out. The old switch is single layered with connection holes and the black wire... View more questions Search
|