Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing A/C Handler/Blower
[ 1 Answers ]
When replacing above, does everything else have to be replaced such as the thermostat, inside blower, etc. I've been told that if you have different makes, it will not work properly and/or it will not be energy efficient and could make for higher bills... Fact or Fiction? Thankx.
Air Handler blower won't
[ 10 Answers ]
I have a 3 1/2 year new AMANA GUIV070FX40 attic mounted system that is the furnace / air handler for an AMANA RCE42C2A condenser / compressor. The entire system, including new ducting and separate electrical circuits (220 for the compressor / 110 for the air handler) was installed by a credible /...
Carrier Air Handler - Blower Won't Shut Off
[ 3 Answers ]
I have a Carrier heat pump package unit with a Carrier air handler, both from late 70's/early 80's (Model number illegible on sticker). When the weather was cold a couple of months ago, the blower would run constantly, making the house unbearably hot. Turning down, turning off, or disconnecting the...
Changed dip switches but air handler blower still on high
[ 15 Answers ]
We bought our house in December, 03; first electric bill was over $400! We now have a 3.5ton Trane heat pump (new in 1/04) and a 4 ton Tempstar Varible Speed (EBV4800A) air handler (new in 6/04); the house is a 2000 sq ft ranch. Air conditioner works fine but have not been satisfied with the...
Air Handler Blower
[ 2 Answers ]
One of the 3 brackets that attaches the fan motor to the blower housing on my inside a/c unit has broken, causing the motor to tilt to one side. I pulled the blower and tie-wired the motor to the housing and it seems to be holding. Hopefully this will last a few days. I could adapt a... View more questions Search
|