Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fiberglass shower drain removal
[ 1 Answers ]
All we wanted to do is change our drain from brass to chrome in our fiber glass shower and I'm afaid we have bitten off more than we can chew. The brass drain is glued in with a 2" piece of pvc pipe sticking up in the center. How can we remove the brass drain wtihout damaging the shower or going...
Installing a drain in a fiberglass shower
[ 1 Answers ]
I’m in the process of installing a fiberglass shower unit in a new basement bathroom, but am somewhat stumped regarding how to attach the drain to the shower and then to the PVC pipe. The floor is concrete and I have 2” PVC rough in for the shower. Once I cut the PVC to the correct height, and...
Fiberglass shower drain leak
[ 3 Answers ]
I have a fiberglass shower leak drain leak. It is caused by the fiberglass cracking around the drain. I need to confirm my process for fixing this problem. 1. Remove old drain. It is a metal with a nut on the bottom. Can't unscrew it because the drain is so loose that it turns in the drain...
Leaky fiberglass shower
[ 5 Answers ]
We remodeled our home recently and this included removing a tile shower and replacing it with a fiberglass shower which was on the second floor. The installation was done by a plumber. We noticed it leaking almost from the start. It drips into the room below down the ceiling fan only when my...
ABS Fiberglass Shower Drain Installation
[ 1 Answers ]
Hi, I've read some great posts on the forums but still can't fully answer my hopefully simple question. I'm installing a fiberglass shower in my basement and picked up an ABS screw-in drain for it to connect to my abs drain pipe. The drain came with a rubber gasket, I'm wondering which side of... View more questions Search
|