Check out some similar questions!
Furnace Gives Heat but Cycles Frequently
[ 16 Answers ]
OK, Labman and others proved very helpful in the past with my ignitor problem so now I have another question: How long should a proper furnace run between cycles? I have read about the flame sensors and "limit switches" but I'm not sure if this is related to either. My heater seems to go...
Furnace cycles on & off but very little heat
[ 0 Answers ]
The fan comes on, then it cycles down, I can hear the pilot light click, then the roar of the furnace as it starts to light, then a loud click & the whole thing starts over again
Coleman 18.6 kw furnace has 4 lugs with round fuses 2-40 amp for fan and 2-60 amp for
[ 1 Answers ]
Coleman 18.6 kw furnace has 4 main lugs for power 2-40 amp round tube fuses 40 amp for fan and 2-60 amp round tube fuses for element what size wire and breakers do I use to wire this thing up the diagraphm is faded away
Coleman electric furnace/heat pump. When elec heat comes on, it will not shut off.
[ 1 Answers ]
Last week when I got up for work I noticed the house warmer than normal. I found the electric heat strips still energized. Tstat was set for 70 house was 74. I do hvac work but deal with air handlers, chillers and small boilers, only residential when its mine. Anyway, I asked the guy at Johnstone...
Furnace heat cycles on/off
[ 1 Answers ]
We have an old furnace,not quite sure how old.It is a Bryant Quietair.I noticed tonight the burners would light,stay lit for a few seconds(30-40secs.),then go out,and then relight a few seconds later.The fan is running throughout the whole process like it should.This goes on constantly.What is... View more questions Search
Add your answer here.
|